You're currently on:
The most abrasive mat in the market suited to removing heavy soil or sand. Removes approx 34% more soil than standard carpeted mats. Nitrile rubber backed. Contact us for special sizes up to 12m.
Highly abrasive mats aggressively scrape and wipe footwear to remove heavy soil, grit and sand etc. Brush fibre intertwined with carpet fibre acts as a brush on the soles of shoes as people walk over the mat. In independent laboratory tests it has been shown that ClassicBrush mats remove approximately 34% more soil than standard carpeted mats. Used as primary barrier mats these will do an excellent job of stopping dirt from entering any premises.
Special sizes of Classic Brush up to 12m long, in 85cm and 115cm widths, available on request.
REQUEST A MAT SAMPLE
Good For:
Heavy soil applications
Environments with a lot of mud, sand & grit
Industrial applications
Not Ideal For:
Water absorption
Ideal Placement:
Covered exteriors
Indoor entryways
Industrial areas
Interior applications with heavy traffic
Features and Benefits:
A. Extra coarse mono-filament nylon fibres combined with traditional solution dyed fibres create excellent scraping and wiping action for maximum soil stopping power.
B. High twist and heat-set static-dissipative nylon yarn makes Classic Brush safe to use around sensitive electronic equipment. Solution dyed yarn insures the mat is impervious to bleach, sunlight and repeated washings.
C. With gripper backing to prevent creep.
D. 100% nitrile rubber backing resists curling and cracking in all types of weather. Classic Brush mats are produced with rubber that is 25% heavier than standard mats to reduce movement.
E. Lutradur™ substrate will not fray, reduces linting, is very heat resistant and creates a strong bond between rubber and carpet.
F. Launderable mats will stand up to repeated commercial washing and drying.
G. Certified Slip Resistant by the National Floor Safety Institute.
Specifications:
Face: Cut pile carpet.
Yarn: 100% Solution dyed with a blend of scraping and wiping yarns.
Backing: 100% Heavy duty nitrile rubber
Size variation: +/- 2%
Cleaning your mat
Cleaning is easy! Simply use vacuum cleaner and extraction cleaner methods or hose off Classic mats with water and hang to dry.
They’re tough mats, so you could also use a stiff brush if that helps.
Further Information:
Not recommended for use in areas exposed to grease or petroleum products.
When purchasing a mat ensure that you have sufficient clearance underneath any door that needs to pass over the top.
Flammability: Passes standard DOCFFI-70
Highly abrasive mats aggressively scrape and wipe footwear to remove heavy soil, grit and sand etc. Brush fibre intertwined with carpet fibre acts as a brush on the soles of shoes as people walk over the mat. In independent laboratory tests it has been shown that ClassicBrush mats remove approximately 34% more soil than standard carpeted mats. Used as primary barrier mats these will do an excellent job of stopping dirt from entering any premises.
Special sizes of Classic Brush up to 12m long, in 85cm and 115cm widths, available on request.
REQUEST A MAT SAMPLE
Good For:
Heavy soil applications
Environments with a lot of mud, sand & grit
Industrial applications
Not Ideal For:
Water absorption
Ideal Placement:
Covered exteriors
Indoor entryways
Industrial areas
Interior applications with heavy traffic
Features and Benefits:
A. Extra coarse mono-filament nylon fibres combined with traditional solution dyed fibres create excellent scraping and wiping action for maximum soil stopping power.
B. High twist and heat-set static-dissipative nylon yarn makes Classic Brush safe to use around sensitive electronic equipment. Solution dyed yarn insures the mat is impervious to bleach, sunlight and repeated washings.
C. With gripper backing to prevent creep.
D. 100% nitrile rubber backing resists curling and cracking in all types of weather. Classic Brush mats are produced with rubber that is 25% heavier than standard mats to reduce movement.
E. Lutradur™ substrate will not fray, reduces linting, is very heat resistant and creates a strong bond between rubber and carpet.
F. Launderable mats will stand up to repeated commercial washing and drying.
G. Certified Slip Resistant by the National Floor Safety Institute.
Specifications:
Face: Cut pile carpet.
Yarn: 100% Solution dyed with a blend of scraping and wiping yarns.
Backing: 100% Heavy duty nitrile rubber
Size variation: +/- 2%
Cleaning your mat
Cleaning is easy! Simply use vacuum cleaner and extraction cleaner methods or hose off Classic mats with water and hang to dry.
They’re tough mats, so you could also use a stiff brush if that helps.
Further Information:
Not recommended for use in areas exposed to grease or petroleum products.
When purchasing a mat ensure that you have sufficient clearance underneath any door that needs to pass over the top.
Flammability: Passes standard DOCFFI-70
